Water Levels II

Report Name: Water Levels II (example)

File Name: EarthSoft.Reports.Library.64102.dll

Dependencies: N/A

Software: EQuIS Professional and EQuIS Enterprise

Source: EQuIS Professional install

Language: English

Output Type: Report Grid1

Description: The Water Levels II Report is a class report that generates water level information, improving on the Water Levels function report. The Water Levels Report conveys information about water levels, depths, and non-aqueous phase liquids (NAPLs) stored in the DT_WATER_LEVEL table. This report uses specific logic for computing the corrected water level elevation based on the input parameters selected. For more information, see Water Level Report Basics and the Water Level Elevation Correction Diagram.

Installation Instructions: This report assembly is part of the EQuIS Professional installation. No additional installation steps are necessary.

Overview:

The Location Name ("LOC_NAME" field) for this report comes from VW_LOCATION. A location is not displayed without a correctly configured record in DT_COORDINATE (where DT_COORDINATE.COORD_TYPE_CODE = DT_FACILITY.COORD_TYPE_CODE and DT_COORDINATE.IDENTIFIER = DT_FACILITY.IDENTIFIER). As a workaround, select DT_LOCATION.LOC_NAME as an "Additional Fields" parameter to display the Location Name from the DT_LOCATION table.

This report contains a hidden 'sigfigs' parameter that will allow configuration of the number of significant digits in the report output.

In Additional Fields for this report, DT_WELL_SEGMENT uses a default SEGMENT_TYPE of SCREEN. An administrator can change this setting in ST_CONFIG with the following entry:

•CONFIG_SECTION = ar

•CONFIG_KEY = SEGMENT_TYPE

•STRING_VALUE = the SEGMENT_TYPE to use, e.g. CASING

Tables: DT_WATER_LEVEL, DT_WELL, RT_ANALYTE_DETAIL, DT_LOCATION, RT_GROUP, RT_GROUP_MEMBER, DT_FACILITY, DT_MEASURE_DATUM, RT_UNIT, RT_UNIT_CONVERSION_FACTOR, VW_LOCATION.

Optional other tables, if Additional Fields are selected:

•DT_WELL

•DT_DRILL_ACTIVITY

•DT_FACILITY

•DT_LOCATION

•DT_MEASURE_DATUM

•DT_TASK

•DT_WATER_LEVEL

•VW_LOCATION

•DT_WELL

•DT_WELL_SEGMENT

Report Parameters*

Location
Group(s)	Parameter for selecting location groups.
Water Level
Date Range	Section to select the water levels start date, and end date.
Task(s)	Select one or more tasks
Reported Value	Parameter for selecting which water levels are reported: calculate, corrected_elevation, water_level_elev
Calculation	This section is available when selecting calculate in reported value.
Elevation	Elevation parameter used for calculated water levels: historical_reference_elev, measure_datum, surf_elev, or top_casing_elev
Depth	Depth parameter used for calculated water levels: calculate, corrected_depth, or water_level_depth
Additional Fields

* This report includes hidden parameters that could affect the output of the report. Consult an EQuIS administrator if these parameters should be visible or use different default values in a published report (a report that allows saving of user reports). These parameters cannot be viewed or changed in unpublished reports outside of a report parameter file. Along with the hidden parameters listed for Analytical Results II, the report also contains:

Default Significant Figure (default = 6)

Water Level\ Approval Code(s), User-estimated product density, and Default Specific Gravity (default = 0.8)

Extra Selects – advanced parameter to add columns that query report fields, including those selected from Additional Fields

Report Output
FACILITY_ID FACILITY_CODE SYS_LOC_CODE LOC_NAME LOC_GROUP LOC_REPORT_ORDER MEASUREMENT_DATE REFERENCE_ELEV WATER_LEVEL EXACT_ELEV MEASURED_DEPTH_OF_WELL DEPTH_UNIT	BATCH_NUMBER TECHNICIAN DRY_INDICATOR_YN MEASUREMENT_METHOD DIP_OR_ELEVATION REMARK EQUIPMENT_CODE LNAPL_CAS_RN LNAPL_DEPTH LNAPL_THICKNESS LNAPL_DENSITY	WATER_DEPTH WATER_LEVEL_DEPTH DNAPL_CAS_RN DNAPL_DEPTH DNAPL_THICKNESS TASK_CODE APPROVAL_CODE X_COORD Y_COORD LONGITUDE LATITUDE

Report Output

FACILITY_ID

FACILITY_CODE

SYS_LOC_CODE

LOC_NAME

LOC_GROUP

LOC_REPORT_ORDER

MEASUREMENT_DATE

REFERENCE_ELEV

WATER_LEVEL

EXACT_ELEV

MEASURED_DEPTH_OF_WELL

DEPTH_UNIT

BATCH_NUMBER

TECHNICIAN

DRY_INDICATOR_YN

MEASUREMENT_METHOD

DIP_OR_ELEVATION

REMARK

EQUIPMENT_CODE

LNAPL_CAS_RN

LNAPL_DEPTH

LNAPL_THICKNESS

LNAPL_DENSITY

WATER_DEPTH

WATER_LEVEL_DEPTH

DNAPL_CAS_RN

DNAPL_DEPTH

DNAPL_THICKNESS

TASK_CODE

APPROVAL_CODE

X_COORD

Y_COORD

LONGITUDE

LATITUDE

1The Report Grid provides additional export options to Excel, Google Earth, Outlook, Shapefile, PDF, Text, Access, XML, or a printer.