Using ACTION_LEVEL

The ACTION_LEVEL_MIN field within DT_ACTION_LEVEL_PARAMETER can be used to manage action level ranges such as a pH range. For example, using the Action Level management interface, a user can add the minimum and maximum pH for a specified range. The ACTION_LEVEL_MIN replaced the DT_ACTION_LEVEL_PARAMETER.MAX_YN field.

To use the Action Level management screen, follow these steps.

1.Select an Action Level Code.

2.Select the Action Level Parameters tab.

3.Add/Select a Parameter.

4.Enter the minimum pH value within the ACTION_LEVEL_MIN field.

5.Enter the maximum pH value within the ACTION_LEVEL field.

Note: ACTION_LEVEL and ACTION_LEVEL_MIN values less than one must have a zero (0) preceding the decimal point (e.g. .5 must be entered as 0.5).

Note: The Action Level Exceedance II Reports have a report parameter labeled Action Level \ Comparison \ Operator.

If ">=" or ">" is selected, then the Exceedance Flag is set If:

RESULT_VALUE >= (or >) ACTION_LEVEL

RESULT_VALUE <= (or <) ACTION_LEVEL_MIN

If "<=" or "<" is selected, then the Exceedance Flag is set If:

RESULT_VALUE <= (or <) ACTION_LEVEL

and

RESULT_VALUE >= (or >) ACTION_LEVEL_MIN

Using ACTION_LEVEL_MIN Field

Using ACTION_LEVEL_MIN Field