Installation Instructions

<< Click to Display Table of Contents >>

Navigation:  EnviroInsite > Installation and Licensing >

Installation Instructions

Note: If you are upgrading to EnviroInsite 7 and will be connecting to an EQuIS database, our licensing has changed. Please contact support@earthsoft.com to update your licenses.

 

Note: To use EnviroInsite 7 connected to an EQuIS database, an appropriate version of EQuIS Professional must be installed via the steps available here.

 

This article explains the process for installing EnviroInsite.

 

Prerequisite Programs

Installing EnviroInsite

Network/Remote Desktop Installation

The xcopy Install

Default Folder Locations

 

Prerequisite Programs

 

Prerequisite programs are operating system add-ons that EnviroInsite needs to access to run properly. These programs should be installed automatically when you run the EnviroInsite installation program. Should the program not run following installation, EarthSoft recommends checking the hardware and software requirements to ensure the proper prerequisites have been met.

 

Note: When using an EnviroInsite database and not an EQuIS database, the appropriate database driver must also be installed.

 

Determine whether these programs are installed by looking at the list of installed programs in the Programs and Features utility, which is accessible from the Windows Control panel.

 

Should any of the prerequisites not be installed automatically during the EnviroInsite installation, then install the version (x86 or x64) of each program that is consistent with the version of EnviroInsite. In other words, if the x86 version of EnviroInsite is installed, then check that the x86 version of the program is installed. To run the EnviroInsite forms or reports within EQuIS Professional, a local installation of EQuIS EnviroInsite 7 is required. Administrative privileges are required to install EnviroInsite, and only one version of the program can be installed on the system.

 

For using EnviroInsite reports or widgets in EQuIS Enterprise or ArcEQuIS, additional files must be added to the Enterprise bin folder. The required files are packaged (EnviroInsite_Enterprise_package_x64_{#}.zip) and available on the EarthSoft Community Center Downloads page (All Items\Products\EnviroInsite\v7).

 

Installing EnviroInsite

 

Complete the following steps to install EnviroInsite:

1.Download the appropriate version of EnviroInsite from the EarthSoft Community Center (ECC) Downloads Dashboard, or have a registered member of the ECC do so for you.

2.Save the package to a known folder (e.g., Downloads). Check the application version.

3.If upgrading from a previous version, uninstall the existing EnviroInsite version by:

a.Executing the install file from the previous version and selecting Remove when prompted, or

b.In the Control Panel, go to Programs> Uninstall or Programs and Features and select EnviroInsite (may include a year in the name if uninstalling an older version), and Uninstall.

4.Unblock the downloaded file.

5.Right-click on the EarthSoft_EnviroInsite *.exe file of the download and Run as administrator (if available; if not, try Run) to start the install process.

6.Follow the prompts provided to complete the installation, allowing administrative permission if prompted:

 

50328-install1

 

50328-install2

 

50328-install3

 

During the Installation stage, you may be required to go through several additional prompts for the prerequisite programs listed in the previous section, particularly if this is the first time installing EnviroInsite on the system.

 

50328-install4

 

Network/Remote Desktop Installation

 

Users have experienced success in network installations of EnviroInsite and in using EnviroInsite with Remote Desktop Services. EarthSoft strongly encourages use of these technologies to allow for widespread use of EnviroInsite within organizations.

 

However, these technologies allow for sharing of the EnviroInsite executable in ways that are inconsistent with the spirit of the legacy (non-EQuIS) single-seat license. For non-EQuIS users of EnviroInsite, it will only run in this mode if you are working off a Concurrent Use License or CUL (previously known as a floating/network license). On startup, EnviroInsite will check for its mode of installation. If it determines that it has been installed on and is being run from a server and if it is running in trial mode or has been activated using a single-seat license, then you will receive a warning and be unable to use the program.

 

Contact support@earthsoft.com if this occurs. A temporarily CUL can be created for testing of the remote installation. The EarthSoft Sales Department can provide information on the cost of upgrading from the single-seat license to a CUL.

 

The xcopy Install

 

EQuIS EnviroInsite is now available as an xcopy zip install. This means that EnviroInsite can be run on a machine without doing a full uninstall/install. The xcopy zip file does not contain the older versions of third party dependencies (Infragistics, Syncfusion, etc.). Follow Steps 4 and 5 below to ensure that all EnviroInsite reports and forms will be available within EQuIS Professional.

 

1.Download the EnviroInsite xcopy zip install from the Downloads Dashboard on the EarthSoft Community Center (ECC).

2.Unblock the downloaded zip file.

3.Extract the zip file.

4.Create a new folder in the file path C:\Program Files\EarthSoft\ and name it EnviroInsite.

5.Copy all of the files from the EnviroInsite [build number] folder and paste into the C:\Program Files\EarthSoft\EnviroInsite folder.

6.Browse to .\EnviroInsite.exe and double-click to run.

 

To enable the EnviroInsite button in EQuIS Professional, a specific path must be used. Copy all of the files from the EnviroInsite [build number] folder and paste into an "EnviroInsite" folder within the parent folder of the EQuIS Professional folder (i.e. both the "EQuIS" and "EnviroInsite" folders must exist within the same folder). For example:

 

With standard (per-machine) EQuIS Professional:
C:\Program Files\EarthSoft\EnviroInsite

 

With per-user installer EQuIS Professional:
C:\Users\<user>\AppData\Local\Programs\EarthSoft\EnviroInsite

 

With x-copy EQuIS Professional:
If the EQuIS Professional package was extracted to Downloads\Installs\EQuIS Professional, the EnviroInsite files should be copied into a Downloads\Installs\EnviroInsite folder.

 

Default Folder Locations

 

Depending on which installer file you use, by default the latest version of EnviroInsite will install to the following folders:

C:\Program Files (x86)\EarthSoft\EnviroInsite\

C:\Program Files\EarthSoft\EnviroInsite

 

The Example folder contains boring log templates, sample data files, and example files. It should install to:
C:\Program Files\EarthSoft\EnviroInsite\Example

 

Legacy license information (single-seat licenses and CULs) is typically stored in:
C:\ProgramData\EarthSoft\ei7