EDGE currently supports the loggers listed in the table below. Example files can be found in the EDGE installation folder under EDGE/Tutor/SensorExamples. Unlisted loggers may be supported. Send example file to support@earthsoft.com for more information.
Device Model |
Description |
Supported File Types |
|---|---|---|
Campbell Scientific OBS-3A and 5+
|
Any model that stores data in TOA5 format is supported.
Turbidity and Temperature monitoring system. Monitors sediments concentrations, logs depth, wave height, wave period, temperature, and salinity.
Requires EQuIS Live |
.dat |
|
|
Live Logger Data
Requires EQuIS Live |
.xlsx |
|
|
Import sample and field results data into Sample Section (data mapped to the columns available under this section) and Field Results Section (CAS_RN must be present in the RVF file; prior setup is required). |
.xlsx |
|
|
Geokon 4500
Requires EQuIS Live |
.csv, .cdf |
Horiba U-51, U-52, U-52G, U-53, U-53G
|
The U-50 series of multi-parameter water quality meters are equipped to measure and log data for as many as 11 parameters simultaneously with one single probe.
|
.csv, .cdf |
|
|
For water quality measurements (Temperature, DO, Conductivity, and pH; plus up to two additional sensors).
|
.csv, .cdf |
|
|
Multi-parameter water quality probes.
|
.csv, .cdf |
|
|
Multi-parameter water quality probe (pH/ORP).
|
.txt |
In-Situ Level 500 (100/300/700)
|
In-Situ Modbus real time data streaming
|
.csv, .cdf,
|
|
|
.csv, .cdf
|
|
|
|
In-Situ Modbus real time data streaming
|
.csv, cdf |
In-Situ Level Troll
|
Also called Level 4000.
In-Situ Modbus real time data streaming
|
.txt
|
In-Situ BaroTroll 500, Rugged Troll 200, Rugged BaroTroll, RDO Pro, |
NA |
|
|
|
Handheld CO2/CH4/LEL/O2/Pressure Monitor designed for analyzing landfill gas composition and flow calculations. Monitors gas migration probes and gas extraction systems.
|
.csv, .cdf |
|
|
This was designed specifically for use on landfills to monitor landfill gas (LFG) extraction systems, flares, and migration control systems.
|
.csv, .cdf |
|
|
Collects standard field results. |
.csv, .cdf |
|
|
Purge stabilization flow cell that measures temperature, dissolved oxygen, specific conductance, pH, ORP, turbidity, and salinity.
|
.csv, .xlsx, .xls |
|
|
(Radio Acoustic Sounding System) Standard field results that measure atmospheric lapse rate. |
.txt |
|
|
Pressure and temperature readings
Requires EQuIS Live |
.csv, .cdf |
|
|
The Barologger Gold uses algorithms based on air pressure only. It measures and logs changes in atmospheric pressure, which are then used to compensate water level readings recorded by a Levelogger.
Requires EQuIS Live |
.csv, .cdf |
|
|
Model 3001 Leveloggers measure ground water and surface water level and temperature measurements using pressure and temperature detectors.
Requires EQuIS Live |
.csv, .cdf |
Thermo Scientific Model 43i Analyzer
|
This is a pulsed fluorescence gas analyzer for sulfur dioxide (SO2) measurement in ambient air.
|
.txt |
|
|
Measures and records groundwater level and temperature.
Note: Discontinued
Requires EQuIS Live |
.csv, .cdf |
|
|
Simultaneously measures numerous water quality parameters, including temperature, conductivity, salinity, dissolved oxygen, pH, and ORP.
Note: The 556 MPS handheld instrument has been discontinued. YSI will continue to support existing 556’s through 2020.
|
.csv
|
|
|
Measures the same parameters as the YSI 556 and also turbidity, chlorophyll, and blue-green algae. The V2-2 measures two of the four parameters simultaneously. Additional calculated parameters include total dissolved solids, resistivity, and specific conductance.
|
.csv
|
|
|
The YSI Model 6820 simultaneously measures numerous water quality parameters, including temperature, conductivity, salinity, dissolved oxygen, pH, and ORP.
|
|
|
|
Ideal for long-term in situ monitoring and profiling, including turbidity, dissolved oxygen, algae, and more. |
.csv
|
|
|
For estuarine, surface water, or ground water applications.
|
.csv
|
|
|
The YSI Professional Plus handheld multi-parameter meter measures a variety of combinations for dissolved oxygen, conductivity, specific conductance, salinity, resistivity, total dissolved solids (TDS), pH, ORP, pH/ORP combination, ammonium (ammonia), nitrate, chloride and temperature. Also a very powerful lab instrument for BODs, pH and ORP.
|
.csv
|
